Decimator Design press information
For immediate release
300 dpi photo attached: Decimator Design’s new DMON-QUAD and MD-LX
See the new MD-LX and DMON-QUAD on the Decimator stand SU7910 at NAB 2017, exhibition 24th - 27th April, Las Vegas Convention Centre, USA
[caption id="attachment_98735" align="alignnone" width="691"]
The new Decimator Design DMON-QUAD and MD-LX[/caption]
London 21st April 2017: Decimator Design has launched two new products to extend their Converter and MultiViewer ranges.
MD-LX (ETA July): The MD-LX is an extra small, ‘lite’ version of the hugely popular MD-HX, the bi-directional HDMI/SDI converter and scaler from Decimator Design. Like the MD-HX, the MD-LX is a bi-directional HDMI/SDI converter for 3G-A/3G-B/HD/SD (minus the scaling/frame rate conversion available on the MD-HX). Pocket sized at 60mm x 73.7mm x 23mm (2.4” x 2.9” x 0.9”), it uses low power allowing operation from the USB and supports both 3G Level A and B on the inputs and outputs, allowing conversion between the two.
MD-LX features the following modes:
The new Decimator Design DMON-QUAD and MD-LX[/caption]
London 21st April 2017: Decimator Design has launched two new products to extend their Converter and MultiViewer ranges.
MD-LX (ETA July): The MD-LX is an extra small, ‘lite’ version of the hugely popular MD-HX, the bi-directional HDMI/SDI converter and scaler from Decimator Design. Like the MD-HX, the MD-LX is a bi-directional HDMI/SDI converter for 3G-A/3G-B/HD/SD (minus the scaling/frame rate conversion available on the MD-HX). Pocket sized at 60mm x 73.7mm x 23mm (2.4” x 2.9” x 0.9”), it uses low power allowing operation from the USB and supports both 3G Level A and B on the inputs and outputs, allowing conversion between the two.
MD-LX features the following modes:
- Auto Select (Active input to all outputs or if both inputs are active SDI to HDMI and HDMI to SDI)
- HDMI IN to SDI OUT and SDI IN to HDMI OUT
- SDI IN to HDMI and SDI OUT
- HDMI IN to HDMI and SDI OUT
