New RovoRx-SDI Receiver Includes 6G-SDI Support, Genlock, and More;Â RovoControl v2.0 Software Release Adds New Presets and Better Multicam Control
Amsterdam, Netherlands, IBC Conference Stand 7.F11 (September 9, 2016) — AJA Video Systems today announced the new RovoRx-SDI HDBaseT receiver and updated RovoControl v2.0 software. RovoRx-SDI is a companion receiver for RovoCam with four integrated 6G/3G-SDI outputs and HDMI for UltraHD/HD support. RovoControl v2.0 adds multicam setup and control and several workflow enhancements to the RovoCam HDBaseT compact block camera ecosystem.
Capable of UltraHD, RovoCam is integrated with an HDBaseT interface, offering the most efficient and affordable method of supporting uncompressed video, audio, control and power over a single CAT 5e/6 cable at lengths of up to 100 meters. The new RovoControl update offers upgraded multicamera control for RovoCam, and new presets and features for more productive workflows in ProAV, industrial, corporate, security and traditional broadcast environments.
RovoRx-SDI
RovoRx-SDI is a companion UltraHD/HD HDBaseT receiver for RovoCam, with additional support for HDBaseT workflows offering integrated 4x 6G/3G-SDI outputs, HDMI video and audio outputs, and genlock support.
Key features include:
Amsterdam, Netherlands, IBC Conference Stand 7.F11 (September 9, 2016) — AJA Video Systems today announced the new RovoRx-SDI HDBaseT receiver and updated RovoControl v2.0 software. RovoRx-SDI is a companion receiver for RovoCam with four integrated 6G/3G-SDI outputs and HDMI for UltraHD/HD support. RovoControl v2.0 adds multicam setup and control and several workflow enhancements to the RovoCam HDBaseT compact block camera ecosystem.
Capable of UltraHD, RovoCam is integrated with an HDBaseT interface, offering the most efficient and affordable method of supporting uncompressed video, audio, control and power over a single CAT 5e/6 cable at lengths of up to 100 meters. The new RovoControl update offers upgraded multicamera control for RovoCam, and new presets and features for more productive workflows in ProAV, industrial, corporate, security and traditional broadcast environments.
RovoRx-SDI
RovoRx-SDI is a companion UltraHD/HD HDBaseT receiver for RovoCam, with additional support for HDBaseT workflows offering integrated 4x 6G/3G-SDI outputs, HDMI video and audio outputs, and genlock support.
Key features include:
- Four 6G/3G-SDI outputs supporting 6G/3G/1.5G with embedded audio
- DA Mode for distributing multiple 6G/3G-SDI signals from an HDBaseT source
- HDMI output for ubiquitous UltraHD and HD prosumer displays
- REF in/out that can be genlocked with other broadcast gear
- USB port for software configuration of SDI settings
- Power over HDBaseT (PoH), allowing RovoCam to be powered remotely from its physical location
- Easier multicamera setup and control for up to eight RovoCams
- Preset control for simple recall and the ability to share presets between RovoCams including ePTZ settings
- Greater color and white balance control for users, improving the ability to match other cameras
- Improved auto and manual spot focus options, offering better focus for off center subjects
- New low-delay mode improves latency and removes image stabilization while in use
- Gamma detail and visibility enhancer settings added to UI
- Improved UART/RS-232 support on third-party RS-232 adapters
